Standard components

Lifter F-ANG-1

Lifter F-ANG-1

FeaturesFeatures: The lifter is made of FCC,skd 61, 718H, NK80 and other materials (supporting the customer's specified materials); the round oil tank has better lubrication effect and supports non-standard customization.Product details...

Lifter E-ANG-1

Lifter E-ANG-1

FeaturesFeatures: The lifter is made of FCC,skd 61, 718H, NK80 and other materials (supporting the customer's specified materials); the round oil tank has better lubrication effect and supports non-standard customization.Product details...

Lifter D-ANG-1

Lifter D-ANG-1

FeaturesFeatures: The lifter is made of FCC,skd 61, 718H, NK80 and other materials (supporting the customer's specified materials); the round oil tank has better lubrication effect and supports non-standard customization.Product details...

Lifter C-ANG-1

Lifter C-ANG-1

FeaturesFeatures: The lifter is made of FCC,skd 61, 718H, NK80 and other materials (supporting the customer's specified materials); the round oil tank has better lubrication effect and supports non-standard customization.Product details...

Lifter B-ANG-1

Lifter B-ANG-1

FeaturesFeatures: The lifter is made of FCC,skd 61, 718H, NK80 and other materials (supporting the customer's specified materials); the round oil tank has better lubrication effect and supports non-standard customization.Product details...

Lifter  A-ANG-1

Lifter A-ANG-1

FeaturesFeatures: The lifter is made of FCC,skd 61, 718H, NK80 and other materials (supporting the customer's specified materials); the round oil tank has better lubrication effect and supports non-standard customization.Product details...

Air Valves APV

Air Valves APV

FeaturesFeatures:The main body and the inner insert are made of stainless steel, which willnever rust; it can better solve the vacuum problem generated during theinjection molding process; it can replace the thimble or auxiliary productdemoulding.Product details...

Air Valves APV

Air Valves APV

FeaturesFeatures:The main body and the inner insert are made of stainless steel, which willnever rust; it can better solve the vacuum problem generated during theinjection molding process; it can replace the thimble or auxiliary productdemoulding.Product details...

Air Valves  VA/FV

Air Valves VA/FV

FeaturesFeatures:European standard gas top; rapid prototyping features; Japan's original springtemperature resistance up to 220 ° C; high air flow characteristics.Product details...

Air Valves  AJV

Air Valves AJV

FeaturesFeatures: Itis used when the thimble is difficult to pull out under the condition of deepand closed vacuum. If the product area is large and it is not easy to fall off,it can also be used. The device has high precision, simple installation and nospace occupation. It is suitable for ejecting of large-plane molds...